J.W. Industries - Nitrile (Buna-N) Sheet Rubber ASTM D-2000 (SAE J200) 1BF 610 
Search Catalog
      GO   
 All Categories    Nitrile (Buna-N) Sheet Rubber ASTM D-2000 (SAE J200) 1BF 610
All Categories > Silicone Hose > Rubber Extrusions > Grip Ring Long (GR-L) > Skirtboard Economy Grade SBR > Grip Ring Standard (GR-S) > Viton Sheet Rubber - Commercial Grade > Mil Spec. - HHP-151F with 10 Oz., Cotton > Repair Clamp Long (RC-L) > Hypalon Sheet Rubber ASTM D-2000 1CE, 615 > Repair Clamp Standard (RC-S) > T.R. Diaphgram Sheet Rubber, SBR > EPDM Sheet Rubber ASTM D-2000 SAE J200 1BA, 610 > MULTI-FLEX Round Long (MF-RL) > Butyl Sheet Rubber ASTM D-2000 SAE J200 AA, 612 > SBR Sheet Rubber ASTM D-1330 Class 1 (Color - Red) > T.R. Diaphgram Sheet Rubber, Neoprene > Silicone Rubber Sheet - Commercial Grade (Color - Red) > SBR Rubber Runner Matting Corrugated > MULTI-FLEX Round Standard (MF-RS) > Repair Clamp Hinge Long (RCH-L) > Repair Clamp Hinge Standard (RCH-S) > Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610 > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 408 > Pure Gum Natural Rubber ASTM D-2000 SAE J200, 1AA, 425 Floating Stock (Color Tan) > Cloth Inserted Sheet Rubber HHP-151F, SBR Class 1 > Cloth Inserted Sheet Rubber HHP-151E, SBR Class 1 > Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2 > Nitrile (Buna-N) Sheet Rubber ASTM D-2000 (SAE J200) 1BF 610 > View Items 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Nitrile (Buna-N) Sheet Rubber ASTM D-2000 (SAE J200) 1BF 610

 
Check up to five results to perform an action.

blank_white

larger image 		Nitrile (NBR) :
+ Excellent resistance to oils, solvents and fuels. Resistant to a broader range of aromatic hydrocarbons than neoprene. Nitrile may be blended with SBR rubber to achieve an economically priced sheet or moderately oil resistant applications.

- Application problems may occur when using Nitrite of unknown quality levels in extreme oil-resistance applications or in contact with fuels and solvents.

Content levels of nitrite can vary widely. Where oil or fuel resistance is required, the fabricator and user need to specify one of the following:
  • an ASTM call-out
  • a military specification
  • an ASTM-specified oil-resistance level based on an ASTM test (e.g. oil swell)

    Material Specification :
    • 60±5 Durometer
    • Average Tensile 1000 lbs. PSI
    • Average Elongation 300%
    • Temperature Range -20°F to +212°F
    • Plate Finish (Fabric Finish Special Order)
    • No Powder
    • Specific Gravity 1.5
    Note :
    Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 9 of 9 1 

Item #

Thickness

Width

Length

Average Roll Weight

Average Tensile Strength

Specific Gravity

List Price

BB132366660 1/32 in 36 in 66 ft 50 lbs 1000 psi 1.5 QUOTE
BB116366660 1/16 in 36 in 66 ft 95 lbs 1000 psi 1.5 QUOTE
BB332366660 3/32 in 36 in 66 ft 145 lbs 1000 psi 1.5 QUOTE
BB18366660 1/8 in 36 in 66 ft 190 lbs 1000 psi 1.5 QUOTE
BB316363360 3/16 in 36 in 33 ft 145 lbs 1000 psi 1.5 QUOTE
BB14363360 1/4 in 36 in 33 ft 190 lbs 1000 psi 1.5 QUOTE
BB38363360 3/8 in 36 in 33 ft 290 lbs 1000 psi 1.5 QUOTE
BB12363360 1/2 in 36 in 33 ft 380 lbs 1000 psi 1.5 QUOTE
BB18486660 1/8 in 48 in 66 ft 255 lbs 1000 psi 1.5 QUOTE
  Results 1 - 9 of 9 1