J.W. Industries - Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610 
Search Catalog
      GO   
 All Categories    Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610
All Categories > Silicone Hose > Rubber Extrusions > Grip Ring Long (GR-L) > Skirtboard Economy Grade SBR > Grip Ring Standard (GR-S) > Viton Sheet Rubber - Commercial Grade > Mil Spec. - HHP-151F with 10 Oz., Cotton > Repair Clamp Long (RC-L) > Hypalon Sheet Rubber ASTM D-2000 1CE, 615 > Repair Clamp Standard (RC-S) > T.R. Diaphgram Sheet Rubber, SBR > EPDM Sheet Rubber ASTM D-2000 SAE J200 1BA, 610 > MULTI-FLEX Round Long (MF-RL) > Butyl Sheet Rubber ASTM D-2000 SAE J200 AA, 612 > SBR Sheet Rubber ASTM D-1330 Class 1 (Color - Red) > T.R. Diaphgram Sheet Rubber, Neoprene > Silicone Rubber Sheet - Commercial Grade (Color - Red) > SBR Rubber Runner Matting Corrugated > MULTI-FLEX Round Standard (MF-RS) > Repair Clamp Hinge Long (RCH-L) > Repair Clamp Hinge Standard (RCH-S) > Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610 > View Items 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610

 
Check up to five results to perform an action.

blank_white

larger image 		Neoprene (CR) :
+ Good oil and petroleum base solvent resistance. Good weathering and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applicants.

- Poor resistance to degreaser solvents. Content levels of neoprene can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels. Where high oil or fuel resistance is required, the fabricator and user need to specify one of the following:
  • an ASTM call-out
  • a military specification
  • an ASTM-specified oil resistance level based on an ASTM test

    Material Specification :
    • 60±5 Durometer
    • Average Tensile 1000 lbs. PSI
    • Average Elongation 300%
    • Temperature Range -20°F to +212°F
    • Plate Finish (Fabric Finish Special Order)
    • No Powder
    • Specific Gravity 1.5
    Note :
    Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 9 of 9 1 

Item #

Thickness

Width

Length

Average Roll Weight

Average Tensile Strength

Specific Gravity

List Price

N116486660 1/16 in 48 in 66 ft 130 lbs 1000 psi 1.5 QUOTE
N18486660 1/8 in 48 in 66 ft 260 lbs 1000 psi 1.5 QUOTE
N316483360 3/16 in 48 in 33 ft 195 lbs 1000 psi 1.5 QUOTE
N14483360 1/4 in 48 in 33 ft 260 lbs 1000 psi 1.5 QUOTE
N38483360 3/8 in 48 in 33 ft 385 lbs 1000 psi 1.5 QUOTE
N12483360 1/2 in 48 in 33 ft 510 lbs 1000 psi 1.5 QUOTE
N58483360 5/8 in 48 in 33 ft 640 lbs 1000 psi 1.5 QUOTE
N34483360 3/4 in 48 in 33 ft 765 lbs 1000 psi 1.5 QUOTE
N1483360 1 in 48 in 33 ft 1025 lbs 1000 psi 1.5 QUOTE
  Results 1 - 9 of 9 1