J.W. Industries - Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 
Search Catalog
      GO   
 All Categories    Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710
All Categories > Silicone Hose > Rubber Extrusions > Grip Ring Long (GR-L) > Skirtboard Economy Grade SBR > Grip Ring Standard (GR-S) > Viton Sheet Rubber - Commercial Grade > Mil Spec. - HHP-151F with 10 Oz., Cotton > Repair Clamp Long (RC-L) > Hypalon Sheet Rubber ASTM D-2000 1CE, 615 > Repair Clamp Standard (RC-S) > T.R. Diaphgram Sheet Rubber, SBR > EPDM Sheet Rubber ASTM D-2000 SAE J200 1BA, 610 > MULTI-FLEX Round Long (MF-RL) > Butyl Sheet Rubber ASTM D-2000 SAE J200 AA, 612 > SBR Sheet Rubber ASTM D-1330 Class 1 (Color - Red) > T.R. Diaphgram Sheet Rubber, Neoprene > Silicone Rubber Sheet - Commercial Grade (Color - Red) > SBR Rubber Runner Matting Corrugated > MULTI-FLEX Round Standard (MF-RS) > Repair Clamp Hinge Long (RCH-L) > Repair Clamp Hinge Standard (RCH-S) > Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610 > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 > View Items 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710

 
Check up to five results to perform an action.

blank_white

larger image 		Neoprene (CR) :
+ Good oil and petroleum base solvent resistance. Good weathering and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applicants.

- Poor resistance to degreaser solvents. Content levels of neoprene can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels. Where high oil or fuel resistance is required, the fabricator and user need to specify one of the following:
  • an ASTM call-out
  • a military specification
  • an ASTM-specified oil resistance level based on an ASTM test

    Material Specification :
    • 50±5 Durometer - Average Tensile 800 lbs. PSI
    • 60±5 Durometer - Average Tensile 1000 lbs. PSI
    • 70±5 Durometer - Average Tensile 1000 lbs. PSI
    • Average Elongation 300%
    • Temperature Range -20°F to +212°F
    • Plate Finish (Fabric Finish Special Order)
    • No Powder
    • Specific Gravity 1.5
    Note :
    Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 30 1 2 

Item #

Thickness

Width

Length

Average Roll Weight

Average Tensile Strength

Specific Gravity

List Price

N132366650 1/32 in 36 in 66 ft 50 lbs 800 psi 1.5 QUOTE
N116366650 1/16 in 36 in 66 ft 100 lbs 800 psi 1.5 QUOTE
N332366650 3/32 in 36 in 66 ft 145 lbs 800 psi 1.5 QUOTE
N18366650 1/8 in 36 in 66 ft 190 lbs 800 psi 1.5 QUOTE
N316363350 3/16 in 36 in 33 ft 145 lbs 800 psi 1.5 QUOTE
N14363350 1/4 in 36 in 33 ft 190 lbs 800 psi 1.5 QUOTE
N516363350 5/16 in 36 in 33 ft 240 lbs 800 psi 1.5 QUOTE
N38363350 3/8 in 36 in 33 ft 290 lbs 800 psi 1.5 QUOTE
N12363350 1/2 in 36 in 33 ft 380 lbs 800 psi 1.5 QUOTE
N58363350 5/8 in 36 in 33 ft 480 lbs 800 psi 1.5 QUOTE
N34363350 3/4 in 36 in 33 ft 575 lbs 800 psi 1.5 QUOTE
N1363350 1 in 36 in 33 ft 765 lbs 800 psi 1.5 QUOTE
N132366660 1/32 in 36 in 66 ft 50 lbs 1000 psi 1.5 QUOTE
N116366660 1/16 in 36 in 66 ft 100 lbs 1000 psi 1.5 QUOTE
N332366660 3/32 in 36 in 66 ft 145 lbs 1000 psi 1.5 QUOTE
N18366660 1/8 in 36 in 66 ft 190 lbs 1000 psi 1.5 QUOTE
N316363360 3/16 in 36 in 33 ft 145 lbs 1000 psi 1.5 QUOTE
N14363360 1/4 in 36 in 33 ft 190 lbs 1000 psi 1.5 QUOTE
N516363360 5/16 in 36 in 33 ft 240 lbs 1000 psi 1.5 QUOTE
N38363360 3/8 in 36 in 33 ft 290 lbs 1000 psi 1.5 QUOTE
N12363360 1/2 in 36 in 33 ft 380 lbs 1000 psi 1.5 QUOTE
N58363360 5/8 in 36 in 33 ft 480 lbs 1000 psi 1.5 QUOTE
N34363360 3/4 in 36 in 33 ft 575 lbs 1000 psi 1.5 QUOTE
N1363360 1 in 36 in 33 ft 765 lbs 1000 psi 1.5 QUOTE
N114361560 1 1/4 in 36 in 15 ft 430 lbs 1000 psi 1.5 QUOTE
  Results 1 - 25 of 30 1 2