J.W. Industries - Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 
Search Catalog
      GO   
 All Categories    Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710
All Categories > Sheet Rubber > Neoprene Sheet Rubber > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 > View Items 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710

 
Check up to five results to perform an action.

blank_white

larger image 		Neoprene (CR) :
+ Good oil and petroleum base solvent resistance. Good weathering and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applicants.

- Poor resistance to degreaser solvents. Content levels of neoprene can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels. Where high oil or fuel resistance is required, the fabricator and user need to specify one of the following:
  • an ASTM call-out
  • a military specification
  • an ASTM-specified oil resistance level based on an ASTM test

    Material Specification :
    • 50±5 Durometer - Average Tensile 800 lbs. PSI
    • 60±5 Durometer - Average Tensile 1000 lbs. PSI
    • 70±5 Durometer - Average Tensile 1000 lbs. PSI
    • Average Elongation 300%
    • Temperature Range -20°F to +212°F
    • Plate Finish (Fabric Finish Special Order)
    • No Powder
    • Specific Gravity 1.5
    Note :
    Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 30 1 2 

Item #

Thickness

Width

Length

Average Roll Weight

Average Tensile Strength

Specific Gravity

Durometer (Shore A ± 5)

N132366650 1/32 in 36 in 66 ft 50 lbs 800 psi 1.5 50
N116366650 1/16 in 36 in 66 ft 100 lbs 800 psi 1.5 50
N332366650 3/32 in 36 in 66 ft 145 lbs 800 psi 1.5 50
N18366650 1/8 in 36 in 66 ft 190 lbs 800 psi 1.5 50
N316363350 3/16 in 36 in 33 ft 145 lbs 800 psi 1.5 50
N14363350 1/4 in 36 in 33 ft 190 lbs 800 psi 1.5 50
N516363350 5/16 in 36 in 33 ft 240 lbs 800 psi 1.5 50
N38363350 3/8 in 36 in 33 ft 290 lbs 800 psi 1.5 50
N12363350 1/2 in 36 in 33 ft 380 lbs 800 psi 1.5 50
N58363350 5/8 in 36 in 33 ft 480 lbs 800 psi 1.5 50
N34363350 3/4 in 36 in 33 ft 575 lbs 800 psi 1.5 50
N1363350 1 in 36 in 33 ft 765 lbs 800 psi 1.5 50
N132366660 1/32 in 36 in 66 ft 50 lbs 1000 psi 1.5 60
N116366660 1/16 in 36 in 66 ft 100 lbs 1000 psi 1.5 60
N332366660 3/32 in 36 in 66 ft 145 lbs 1000 psi 1.5 60
N18366660 1/8 in 36 in 66 ft 190 lbs 1000 psi 1.5 60
N316363360 3/16 in 36 in 33 ft 145 lbs 1000 psi 1.5 60
N14363360 1/4 in 36 in 33 ft 190 lbs 1000 psi 1.5 60
N516363360 5/16 in 36 in 33 ft 240 lbs 1000 psi 1.5 60
N38363360 3/8 in 36 in 33 ft 290 lbs 1000 psi 1.5 60
N12363360 1/2 in 36 in 33 ft 380 lbs 1000 psi 1.5 60
N58363360 5/8 in 36 in 33 ft 480 lbs 1000 psi 1.5 60
N34363360 3/4 in 36 in 33 ft 575 lbs 1000 psi 1.5 60
N1363360 1 in 36 in 33 ft 765 lbs 1000 psi 1.5 60
N114361560 1 1/4 in 36 in 15 ft 430 lbs 1000 psi 1.5 60
  Results 1 - 25 of 30 1 2