J.W. Industries - Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2 
Search Catalog
      GO   
 All Categories    Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2
All Categories > Silicone Hose > Rubber Extrusions > Grip Ring Long (GR-L) > Skirtboard Economy Grade SBR > Grip Ring Standard (GR-S) > Viton Sheet Rubber - Commercial Grade > Mil Spec. - HHP-151F with 10 Oz., Cotton > Repair Clamp Long (RC-L) > Hypalon Sheet Rubber ASTM D-2000 1CE, 615 > Repair Clamp Standard (RC-S) > T.R. Diaphgram Sheet Rubber, SBR > EPDM Sheet Rubber ASTM D-2000 SAE J200 1BA, 610 > MULTI-FLEX Round Long (MF-RL) > Butyl Sheet Rubber ASTM D-2000 SAE J200 AA, 612 > SBR Sheet Rubber ASTM D-1330 Class 1 (Color - Red) > T.R. Diaphgram Sheet Rubber, Neoprene > Silicone Rubber Sheet - Commercial Grade (Color - Red) > SBR Rubber Runner Matting Corrugated > MULTI-FLEX Round Standard (MF-RS) > Repair Clamp Hinge Long (RCH-L) > Repair Clamp Hinge Standard (RCH-S) > Neoprene Sheet Rubber ASTM D-2000 [SAE J200] 1BC, 610, SC 610 > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 508, 610, 710 > Neoprene Sheet Rubber ASTM D-2000 (SAE J200) 1BC, 408 > Pure Gum Natural Rubber ASTM D-2000 SAE J200, 1AA, 425 Floating Stock (Color Tan) > Cloth Inserted Sheet Rubber HHP-151F, SBR Class 1 > Cloth Inserted Sheet Rubber HHP-151E, SBR Class 1 > Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2 > View Items 
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2

 
Check up to five results to perform an action.

blank_white

larger image 		Neoprene (CR) :
+ Good oil and petroleum base solvent resistance. Good weathering and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applicants.

- Poor resistance to degreaser solvents. Content levels of neoprene can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels.
Where high oil or fuel resistance is required, the fabricator and user need to specify one of the following:
  • an ASTM call-out
  • a military specification
  • an ASTM-specified oil resistance level based on an ASTM test
Matting in green is special order and 25% more.

Material Specification :
  • 55±5 Durometer
  • Average Tensile 1/8" 100 lb. Grab
  • Average Elongation 1/8" 8%
  • Temperature Range -20°F to +212°F
  • Plate Finish (Fabric Finish Special Order)
  • No Powder
  • Cotton Fabric 4 - 5 oz.
Note :
Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 4 of 4 1 

Item #

Thickness

Width

Length

Average Roll Weight

Plies

List Price

CINE116486655 1/16 in 48 in 66 ft 130 lbs 1 QUOTE
CINE18406655 1/8 in 40 in 66 ft 210 lbs 2 QUOTE
CINE18486655 1/8 in 48 in 66 ft 255 lbs 2 QUOTE
CINE14403355 1/4 in 40 in 33 ft 210 lbs 4 QUOTE
  Results 1 - 4 of 4 1