Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2 on J.W. Industries

Printable Page Email

Email This Page

Save To Favorites


	Cloth Inserted Sheet Rubber HHP-151E, Neoprene Class 2
	Check up to five results to perform an action.

	larger image		Neoprene (CR) : + Good oil and petroleum base solvent resistance. Good weathering and ozone resistance. Neoprene may be blended with SBR rubber to achieve an economically priced sheet for moderately oil resistant applicants. - Poor resistance to degreaser solvents. Content levels of neoprene can vary widely. Application problems may occur when using blended or commercial grades of neoprene sheet of unknown quality levels in contact with oil, solvents and fuels. Where high oil or fuel resistance is required, the fabricator and user need to specify one of the following: an ASTM call-out a military specification an ASTM-specified oil resistance level based on an ASTM test Matting in green is special order and 25% more. Material Specification : 55±5 Durometer Average Tensile 1/8" 100 lb. Grab Average Elongation 1/8" 8% Temperature Range -20°F to +212°F Plate Finish (Fabric Finish Special Order) No Powder Cotton Fabric 4 - 5 oz. Note : Other thickness, width, and or lengths are available. A cutting charge applies to less than a full roll.